Toyota CH-R: Toyota Safety Sense

The Toyota Safety Sense consists of the driving assist systems and contributes to a safe and comfortable driving experience:

WARNING

■Toyota Safety Sense

The Toyota Safety Sense operates under the assumption that the driver will drive safely, and is designed to help reduce the impact to the occupants in a collision and assist the driver under normal driving conditions.

As there is a limit to the degree of recognition accuracy and control performance that this system can provide, do not overly rely on this system. The driver is solely responsible for paying attention to the vehicle's surroundings and driving safely.

■For safe use

• Do not overly rely on this system.

  The driver is solely responsible for paying attention to the vehicle's surroundings and driving safely. This system may not operate in all situations and provided assistance is limited. Over-reliance on this system to drive the vehicle safely may lead to an accident resulting in death or serious injury.

• Do not attempt to test the operation of the system, as it may not operate properly, possibly leading to an accident.
• If attention is necessary while performing driving operations or a system malfunction occurs, a warning message or warning buzzer will be operated. If a warning message is displayed on the display, follow the instructions displayed.
• Depending on external noise, the volume of the audio system, etc., it may be difficult to hear the warning buzzer. Also, depending on the road conditions, it may be difficult to recognize the operation of the system.

■When it is necessary to disable the system

In the following situations, make sure to disable the system.

Failure to do so may lead to the system not operating properly, possibly leading to an accident resulting in death or serious injury.

• When the vehicle is tilted due to being overloaded or having a flat tire
• When driving at extremely high speeds
• When towing another vehicle
• When the vehicle is being transported by a truck, ship, train, etc.
• When the vehicle is raised on a lift and the tires are allowed to rotate freely
• When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on vehicle wheel balancer
• When the vehicle is driven in a sporty manner or off-road
• When using an automatic car wash
• When a sensor is misaligned or deformed due to a strong impact being applied to the sensor or the area around the sensor
• When accessories which obstruct a sensor or light are temporarily installed to the vehicle
• When a compact spare tire or tire chains are installed to the vehicle or an emergency tire puncture repair kit has been used
• When the tires are excessively worn or the inflation pressure of the tires is low
• When tires other than the manufacturer specified size are installed
• When the vehicle cannot be driven stably, due to a collision, malfunction, etc.

Driving assist systems

• AHS (Adaptive High-beam System) (if equipped)
• AHB (Automatic High Beam) (if equipped)
• PCS (Pre-Collision System)
• LTA (Lane Tracing Assist)
• LDA (Lane Departure Alert)
• LCA (Lane Change Assist) (if equipped)
• FCTA (Front Crossing Traffic Alert) (if equipped)
• PDA (Proactive Driving Assist) (if equipped)
• RSA (Road Sign Assist) (if equipped)
• Dynamic radar cruise control
• Cruise control
• Speed limiter (if equipped)
• Emergency Driving Stop System
• Driver monitor (if equipped)

Toyota Safety Sense software updateSensors used by Toyota Safety Sense