Toyota CH-R: Hood

Opening the hood

1. Pull the hood lock release lever.

The hood will pop up slightly.

2. Push the auxiliary catch lever to the left and lift the hood.

3. Hold the hood open by inserting the support rod into the slot.

WARNING

■When the hood is open

Even if the power switch is turned off, the cooling fans may continue to operate for a short time. When the cooling fans are rotating, do not touch or approach the inside of the engine compartment.

■Pre-driving check

Check that the hood is fully closed and locked.

If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury.

■After installing the support rod into the slot

Make sure the rod supports the hood securely preventing it from falling down onto your head or body.

NOTICE

■When closing the hood

Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod not clipped could cause the hood to bend.

Do-it-yourself service precautionsPositioning a floor jack