Toyota CH-R: Head restraints

Head restraints are provided for all seats.

WARNING

■Head restraint precautions

Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.

• Use the head restraints designed for each respective seat.
• Adjust the head restraints to the correct position at all times.
• After adjusting the head restraints, push down on them and make sure they are locked in position.
• Do not drive with the head restraints removed.

Adjusting a head restraint

■ Front seats

1. Up

Pull the head restraint up.

2. Down

Push the head restraint down while pressing the lock release button A.

■ Rear center seat

1. Up

Pull the head restraint up.

2. Down

Push the head restraint down while pressing the lock release button A.

■ Rear outer seats

1. Up

Pull the head restraint up.

2. Down

Push the head restraint down while pressing the lock release button A.

■Adjusting the height of the head restraints (front seats)

Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

■Adjusting the rear seats head restraint

Always raise the head restraint one level from the stowed position when using.

Removing the head restraints

■ Front seats

Pull the head restraint up while pressing the lock release button A.

If the head restraint touches the ceiling, making the removal difficult, adjust the seatback angle.

■ Rear center seat

Pull the head restraint up while pressing the lock release button A.

■ Rear outer seats

1. Pull the seatback lock release lever A and fold down the seatback until it reaches the position where the head restraints can be removed.

2. Pull the head restraint up while pressing the lock release button B.

Installing the head restraints

■ Front seats

Align the head restraint with the installation holes and push it down to the lock position.

Press and hold the lock release button A when lowering the head restraint.

If the head restraint touches the ceiling, making the installation difficult, adjust the seatback angle.

■ Rear center seat

Align the head restraint with the installation holes and push it down to the lock position.

Press and hold the lock release button A when lowering the head restraint.

■ Rear outer seats

1. Pull the seatback lock release lever A and fold down the seatback until it reaches the position where the head restraints can be installed.

2. Align the head restraint with installation holes and push it down to the lock position.

Press and hold the lock release button B when inserting the head restraint.