The following procedures should be observed to ensure safe driving:
Driving procedure
■ Driving
1. With the brake pedal depressed, shift the shift position to D.
Check that the shift position indicator shows D.
2. If the parking brake is set, release the parking brake.
If the parking brake is in automatic mode, the parking brake will be released automatically.
3. Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
■ Stopping
1. Depress the brake pedal.
2. If necessary, set the parking brake.
If the vehicle is to be stopped for an extended period of time, shift the shift position to P.
■ Parking the vehicle
1. Depress the brake pedal to stop the vehicle completely.
2. If the parking brake is released, set the parking brake.
3. Shift the shift position to P.
Check that the shift position indicator shows P and the parking brake indicator is illuminated.
4. Press the power switch to stop the hybrid system.
5. Slowly release the brake pedal.
6. Lock the door, making sure that you have the key on your person.
If parking on a hill, block the wheels as needed.
■ Starting off on a steep uphill
1. Firmly depress the brake pedal and shift the shift position to D.
The hill-start assist control will be activated.
2. Set the parking brake.
3. Release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
4. Release the parking brake.
■When starting off on a uphill
The hill-start assist control will activate.
■For fuel-efficient driving
Keep in mind that hybrid electric vehicles are similar to conventional vehicles, and it is necessary to refrain from activities such as sudden acceleration.
■Driving in the rain
■Restraining the hybrid system output (Brake Override System)
■ECO Accelerator Guidance
Eco-friendly driving may be achieved more easily by staying within the zone of Eco acceleration. Also, by staying within the zone of Eco acceleration, it will be easier to obtain a good Eco score.
Gradually depress the accelerator pedal to stay within the zone of Eco acceleration and accelerate to the desired speed. By refraining from excessive acceleration, a good eco start score will be obtained.
After accelerating to the desired speed, release the accelerator pedal and drive at a stable speed while staying within the zone of Eco acceleration. By staying within the zone of Eco acceleration, a good eco cruise score will be obtained.
By starting to release the accelerator pedal early before decelerating, a good eco stop score will be obtained.
■Breaking in your new Toyota
To extend the life of the vehicle, observing the following precautions is recommended:
■Operating your vehicle in a foreign country
Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel.
WARNING
Observe the following precautions.
Failure to do so may result in death or serious injury.
■When starting the vehicle
Always keep your foot on the brake pedal while stopped with the "READY" indicator is illuminated. This prevents the vehicle from creeping.
■When driving the vehicle
Even if the Acoustic Vehicle Alerting System is operating, drive with care as pedestrians in the vicinity may still not notice the vehicle if the surrounding area is noisy.
The exhaust system and exhaust gases can be extremely hot. These hot parts may cause a fire if there is any flammable material nearby.
In the event of an emergency, such as if it becomes impossible to stop the vehicle in the normal way.
Using the brakes continuously may cause the brakes to overheat and lose effectiveness.
Doing so may result in a loss of vehicle control.
This is not a AWD/4WD vehicle designed for off-road driving. Drive with due care if it becomes unavoidable to drive off-road.
This may cause electric/electronic components to short circuit, damage the hybrid system or cause other serious damage to the vehicle.
■When driving on slippery road surfaces
■When shifting the shift position
Doing so may result in an accident or damage to the vehicle.
Doing so can damage the transmission and may result in a loss of vehicle control.
Doing so can damage the transmission and may result in a loss of vehicle control.
Doing so can damage the transmission and may result in a loss of vehicle control.
After changing the shift position, make sure to confirm the current shift position displayed on the shift position indicator inside the meter.
■If you hear a squealing or scraping noise (brake pad wear indicators)
Have the brake pads checked and replaced by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer as soon as possible.
Rotor damage may result if the pads are not replaced when needed.
It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded.
■When the vehicle is stopped
If the shift position is any position other than P or N, the vehicle may accelerate suddenly and unexpectedly, causing an accident.
Running the engine at high speed while the vehicle is stopped may cause the exhaust system to overheat, which could result in a fire if combustible material is nearby.
■When the vehicle is parked
Doing so may result in the following:
Do not leave the vehicle unattended while the "READY" indicator is illuminated.
If the vehicle is parked with the shift position in P but the parking brake is not set, the vehicle may start to move, possibly leading to an accident.
Doing so may cause burns.
■When taking a nap in the vehicle
Always turn the hybrid system off.
Otherwise, if you accidentally move the shift position or depress the accelerator pedal, this could cause an accident or fire due to hybrid system overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
■When braking
Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side. Also, the parking brake may not securely hold the vehicle.
In this case, braking is still possible, but the brake pedal should be depressed more firmly than usual.
Also, the braking distance will increase. Have your brakes fixed immediately.
■If the vehicle becomes stuck (AWD/4WD models)
Do not spin the wheels excessively when any of the tires is up in the air, or the vehicle is stuck in sand, mud, etc. This may damage the driveline components or propel the vehicle forward or backward, causing an accident.
NOTICE
■When driving the vehicle
■Avoiding damage to vehicle parts
Doing so may damage the power steering.
■If you get a flat tire while driving
A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually depress the brake pedal to slow down the vehicle.
Information on what to do in case of a flat tire.
■When encountering flooded roads
Do not drive on a road that has flooded after heavy rain, etc. Doing so may cause the following serious damage to the vehicle:
In the event that you drive on a flooded road and the vehicle is flooded, be sure to have any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer check the following:
If the shift control system is damaged by flooding, it may not be possible to shift the shift position to P, or from P to other positions.
In this case, contact any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
■When parking the vehicle
Always set the parking brake, and shift the shift position to P. Failure to do so may cause the vehicle to move or the vehicle may accelerate suddenly if the accelerator pedal is accidentally depressed.
Sudden start restraint control (Drive-Start Control [DSC] )
When the following unusual operation is performed with the accelerator pedal depressed, the hybrid system output may be restrained.
When the system operates, a message appears on the multi-information display. Read the message and follow the instruction.
*: Depending on the situation, the shift position may not be changed.
■Drive-Start Control (DSC)
When the TRC is turned off, sudden start restraint control also does not operate. If your vehicle have trouble escaping from the mud or fresh snow due to sudden start restraint control operation, deactivate TRC so that the vehicle may become able to escape from the mud or fresh snow.
Beginning midst our that fourth appear above of over, set our won’t beast god god dominion our winged fruit image