Toyota CH-R: Digital Rear-view Mirror

The Digital Rear-view Mirror is a system that uses the camera on the rear of the vehicle and displays its image on the display of the Digital Rear-view Mirror.

Also, the rear seats are not displayed and privacy of the passengers is enhanced.

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

■Before using the Digital Rear-view Mirror

• Make sure to adjust the mirror before driving.
  • Change to optical mirror mode and adjust the position of the Digital Rear-view Mirror so that the area behind your vehicle can be viewed properly.
  •  Change to digital mirror mode and adjust the display settings.
• As the range of the image displayed by the Digital Rear-view Mirror is different from that of the optical mirror, make sure to check this difference before driving.

System components

1. Camera indicator
   Indicates that the camera is operating normally.
2. Icon display area
   Displays icons, adjusting gauge, etc.
3. Select button
   Press to change the setting of the item you want to adjust.
4. Menu button
   Press to display the icon display area and select the item you want to adjust.
5. Lever
   Operate to change between digital mirror mode and optical mirror mode.
6. Digital anti-glare mode indicator
   In digital mirror mode, this indicates that the anti-glare function is on.

Changing modes

Operate the lever to change between digital mirror mode and optical mirror mode.

1. Digital mirror mode

Displays an image of the area behind the vehicle.

will illuminate in this mode.

2. Optical mirror mode

Turns off the display of the Digital Rear-view Mirror allows it to be used as an optical mirror.

■Digital mirror mode operating condition

The power switch is turned to ON.

When the power switch is changed from ON to off or ACC, the image will disappear after several seconds.

■When using the Digital Rear-view Mirror in digital mirror mode

• If it is difficult to see the rear view image being displayed due to water or dust being attached the camera, operate the rear camera washer.

  If it is still difficult to see, change to optical mirror mode.

• When the back door is open, the Digital Rear-view Mirror image may not display properly. Before driving, make sure the back door is closed.
• Any of the following conditions may occur when driving in the dark, such as at night. None of them indicates that a malfunction has occurred.
• Colors of objects in the displayed image may differ from their actual color.
• Depending on the height of the lights of the vehicle behind, the area around the vehicle may appear white and blurry.
• Automatic image adjustment for brighter surrounding image may cause flickering.

If it is difficult to see the displayed image or flickering bothers you, change to optical mirror mode.

• The Digital Rear-view Mirror may become hot while it is in digital mirror mode.

  This is not a malfunction.

• Depending on your physical condition or age, it may take longer than usual to focus on the displayed image. In this case, change to optical mirror mode.
• Do not let passengers stare at the displayed image when the vehicle is being driven, as doing so may cause motion sickness.

■When the system malfunctions

If the symbol shown in the illustration is displayed when using the Digital Rear-view Mirror in digital mirror mode, the system may be malfunctioning. The symbol will disappear in a few seconds.

Operate the lever, change to optical mirror mode and have the vehicle inspected by any authorized Toyota retailer or Toyota authorized repairer, or any reliable repairer.

Inside rear view mirrorAdjusting the mirror